More actions
door lock handle repair Handle Replacement
It's worth replacing door handles if you aren't happy with the way they look or if they are difficult to use. Installing the new handle on your door is easy if you have patience.
Modern door handles are usually equipped with cover plates that hide the screws, giving them an attractive look. If the new handle doesn't already have them connected, you'll have to attach them separately.
Remove the old Handle
Door handles aren't just an essential for aesthetics of your home, but they're vital for safety since they allow you to lock and unlock your door. As time passes, the door handle may start to lose its grip or feel loose. It may also begin to look old and worn. This is a clear indication that it's time to replace the door handle.
If your door handle is becoming difficult to use, it may be time to replace it. This is a problem because it means that you are unable to not lock or unlock your door, which could create a security risk for you and your family.
It is also a good idea to replace the handle on your door in the event that it's damaged or broken. A broken door handle is dangerous, especially for elderly and children members who might struggle to open it. They may get trapped. It's simple to fix a damaged handle on the door.
Most modern door handle repair handles are standard size and so they will fit on any door. If you aren't certain if your new door handle will work, remove the old one and measure its housing holes. This will help you to buy the correct sized door handle.
It is the easiest method to remove the door handle by taking it off from the door. Usually it is a matter of using a screwdriver. However some door handles have the cover plate which hides the mounting screws, so you'll need to pry off this to access the screws underneath. After you've removed the old handle, make a note of how the spindle is connected so that you can make sure it is aligned when you put in the new one.
Alternately, you can take off the door handle by uncrewing it from the latch mechanism. This is typically done with a screwdriver but you'll need to locate the small latch, which is located on the edge of the trim piece. After removing the latch, unscrew the handle and strike plate. Then, you can remove the latch from the edge of the door.
Removal of the Strike Plate
When replacing your handle, you'll be required to replace the latch plate, which holds the hole that the door's latch is inserted into when it closes. The new handles will have two latch plates which are a circular and a rectangular plate (see the above diagram which illustrates the components of the door handle). If your current latch plate is rectangular in shape, swap it out for the round one so that the latch hooks into the strike plate in a way that makes the handle easier to use.
The first step is to unscrew the screw that holds the latch plate in place. These screws are often tight, and will require some force to loosen. If possible, it may be helpful to have another person assist with this part.
The latch plate should easily lift itself out of the door after the screws have been removed. If the latch plate is stuck or won't move, use a small file to scrape the edges. This may help free the plate.
Now you can move on to preparing the new door strike plate for installation. With the wood screws that came with your new handles, attach the latch plate onto the inside of the doorjamb. Do not overtighten your screws because this could cause damage to the strike plate.
If you're not sure whether the latch plate is in its correct position, shut and open the door to check whether it latches and closes correctly. If it doesn't then you'll have to adjust the strike plate up or down, or move it forward or back, until the door closes and latches properly.
If the door is moving or jiggling, it may be necessary to expand the hole for latching in the strike plate. This is more common on older doors. It can be caused by wear and tear hinges that are too small, a wrong size latch or a damaged strike plate. If this is the case, follow the exact procedure as adjusting the strike plate, but using a metal file instead of an hammer and chisel.
Take off the Latch
The latch is a curved metal piece which slides in and out of a hole on the inside of your door. The latch moves forward when you turn the handle. It also connects to a hole in the frame of the door to keep your door shut. If your door wiggles when you close it, replacing the latch could be all you need to fix it.
The screws that secure the door latch are difficult to see, but you can usually put a screwdriver in a small hole on the trim plate and pry the latch off. After removing the trim plate, you should be able to take off the latch as well as the bolts that hold it, as well as the spindle.
If the latch doesn't easily release you can try using the clip of a paper or tool to release it from the handle mechanism. Place the item in the recessed latch slot and gently turn or jiggle it until you feel the handle and latch begin to split. It may take this several times before the latch is loose enough to allow it to be pulled out.
You should be able slide the new latch into its slot without any issues after you've removed the old one. Make use of the new screws to connect the latch to the strike plate or door frame. Make sure it's correctly placed in the slot, aligned with the screw chambers.
Take note of the backset (the distance between the centre of the large hole in the door's front and the edge) prior to installing the new handle. You should also check whether the size of the latch on the new handle is in line with the measurement of your existing handle.
If you are replacing the handle or latch, or if your old lock cylinder is damaged then you will need an entirely new one. If you're not replacing the locks however, a new latch will fit into the existing recess and be compatible with the keys you have currently. Make sure you select the latch with rectangular cover plates that match your handles.
Removal of the Cover Plate
You can replace your double glazed door handle repair door handle; https://yogaasanas.science/wiki/10_Quick_Tips_About_Double_Glazing_Handles, handles with a contemporary rose and lever designs to enhance the appearance of your house. You can purchase complete sets with matching escutcheons, privacy adaptors and escutcheons.
To replace an internal door handle remove the cover plate (or rose) that covers the screws and mechanism. Find an release tab on the plate and use a flathead screwdriver to lift it off the knob. It may have an opening on one edge or be secured by pins.
After the cover plate is off take off the screw that holds the inside handle in place and set it aside. It is also necessary to take out the screws that hold the latch and inner plates and the latch plate, which can be done by loosening them using the help of a Philips screwdriver. Then, remove the inner plates and latch plate from the door and put them aside.
Some doors don't have this gap. If yours doesn't then you'll have to make a hole in the door to accommodate the new handle. The procedure for this is similar to the procedure opening a door using the lock, however you'll have to be extra careful to avoid damaging the door or frame.
Installing new door knob screws is required after the holes have been made. Be sure to purchase the same size as the previous ones, to ensure that you don't end up with an handle that is either too tight or too loose. You'll also need to install an additional latch plate and strike rod, which aren't included with most door handle sets.
Amazon's Choice FAERSI 2-piece chrome finish handle sets are a great alternative if you're in search of a top-quality interior door handle replacement set. It's a factory fit and has received hundreds of 5-star reviews from happy customers. It's a great choice to replace worn or damaged interior door hardware on your Chevy.